Wiz灯带支架
Wiz Lightstrip Holders
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Just some little holders to put your Wiz Lightstrips in for mounting at an angle on a flat surface. I used these to mount my light strips around the top, bottom and sides of my bookcase shelves.
The strips just snap in with very slight pressure.
These are angled at 35 degrees, and i've included different lengths. They fit together loosely, and can be glue together if you really want to.
there are two different end pieces, one lacks the connector tab, and the other lacks the tab insert.
If you need different angles, or lengths, just PM me and i can post them.
Tags
License
Wiz Lightstrip Tracks
by mike_e_allen is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
联系我们
热门推荐
-
滚动核弩机驱动系统3D模型2023-03-26 -
HP Reverb G1 有线绑架2023-04-09 -
微软摄像头电影院版外壳2023-04-12 -
可定制 Yashica / Bay 1 镜头罩2023-05-14 -
可参数化床垫水平校准测试2024-04-15
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
GPD Win3 把手型号2023-04-07 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
GLOCK 17（第三代）蓝枪2024-04-13 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
丰田22RE发动机Starer电机2025-08-08 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
巴黎卢浮宫的三圣母像2025-07-16