灯罩模型093

Lamp Shade 093

2023-03-26 18:57:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

这里有两款设计相同的基本款灯罩文件。一种颜色具有内凹的沟槽，另一种颜色具有外凸的沟槽。我只是把设计翻转了过来。

This is a twisty, crisscross table lamp shade to give soft light on a desk or in the corner of your room. There are no wires to cut, splice or solder together to make a base. It is designed to fit on a 4 inch/10cm led display base. Don't use a tea light with a real flame.
nThe printed shade sits on top of the base, it is not attached. I used a colored led base from Amazon here:
https://www.amazon.com/dp/B08YYTGX2H?psc=1&ref=ppx_yo2ov_dt_b_product_details
nOr a white one here:
https://www.amazon.com/dp/B08Y5GCPTC?ref=ppx_yo2ov_dt_b_product_details&th=1

The lamp shade should be printed without a top or a bottom. The stl file is solid with a top and bottom so be sure and put 0 bottom layers and 0 top layers in your slicer.

The vase in the photos is printed in vase mode and has not been scaled and is printed at 100% of the stl file. The x and y axis shows 100mm wide and z is 160mm tall. It can be printed in any color of pla. A lighter color will let light shine through better and show off the design better. The photos show the vase printed in white by Tecbear. The lamp shade can be printed in spiral vase mode or can be printed in normal mode by unchecking vase mode, set walls to 1 and 0 top layers, 0 bottom layers and 0% infill. A brim is recommended, as a single wall on the lamp will have difficulty sticking to the print bed.

All my designs have a copyright, you may not download and sell them.

Tips are appreciated!

Enjoy...

灯罩模型093

朋友，你觉得上面这个模型，属于下面的哪个分类？