构建Bambu X1、P1、A1板持有器

Build Plate Holder for Bambu X1, P1, A1

2024-03-26 06:18:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I couldn't find a build plate holder with slots wide enough to fit my Lightyear G10 Plate, so I designed a basic holder that will allow you to vertically store several plates regardless of thickness.

Prints fairly well, I do recommend turning off the AUX fan to help reduce warping.

You may also need to print/use some clips to keep the corners of the build plate from pulling up off of the magnetic bed.

The first version I printed warped fairly significantly. I tweaked the settings (turned off aux fan, etc) to help reduce that. The final version still had some warping, and assuming you have good adhesion, it can pull the edges of the build plate up since it is so close to the corners.

I didn't bother re-printing with corner clips, because it was good enough for my purposes, but If you want the best chance at having it as flat as possible, it might be worth giving that a try. It's a fairly common issue for long narrow prints that are close to the corners from the research I did. Here's the clamps that are on my to-print list so that I have them for similar prints in in the future: https://www.printables.com/model/419758-bed-clamps-low-profile-for-bambu-lab-x1p1p

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
.12
Infill:
15% Gyroid
Filament brand:
Bambu Lab
Filament color:
Gray
Filament material:
PLA
Notes:
- Consider turning off the Aux fan in filament settings if you are worried about warping.
- You can also consider using clips on the corners of your build plate to help keep it from pulling off the magnetic bed.