六棱形办公整理架

Hexagonal Desk Orgainzer

2024-03-26 08:42:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I decided it was time to replace the old utensil holder that's been my pen/pencil holder for 20 years, and hexagons popped in my mind, so I drew this up and printed it.

The walls are a little bit thick, but it prints clean and holds plenty of pens and such. Make sure you have enough infill to properly support the bottoms of the holders so they start properly. Throw some anti-slip rug tape on the bottom and it won't go anywhere.

Tuned print profiles available over on (Makerworld)[https://makerworld.com/en/models/395534#profileId-296834], including fun effects for co-extrusion filaments!

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20% Support Cubic
Filament brand:
Prusament
Filament color:
Mystic Green
Filament material:
PLA

Tags

desk hexagon organizer tray

License

CC BY-NC-SA

Hexagonal Desk Orgainzer
by RevHazlett is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

六棱形办公整理架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Glock 17/34 Solidworks 模型文件
2023-04-21
猫咪零食球
2024-03-29
适用于ebyte E104-BT5040U USB适配器的外壳
2024-04-28
GLOCK 17型手枪
2024-05-03
HomePod mini 壁挂式插座支架（欧规版）｜稳固不占地·支持线材整理
2024-05-04

最新模型