顶梁吊装架

Top Truss Gantry Crane

2024-03-26 12:50:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For mostly resin printing.

This is a top truss gantry crane, It is a work in progress, meaning that not all of the edges around the crane join up, if you wish to use this you will need to have a look around it first.

I had been searching for one of these for a diorama i was building, instead all i found was a few pictures, so from them i made this, it does not have everything, no elevator, no engines, no motors, just the basic design which took some time.. i also left a little man on a set of the stairs, he is representative of a person who is 187cm tall. you can use him as the marker for your particular scale, right now he is around the 200 scale mark.

I posted the file and the photo of the file, as Thingiverse is somehow lacking at present the ability to do this.

So, grab the crane, put it on your build plate and put on your supports, and then go from there.. oh, and by the way, I saved these items as the basic build block.. what that means is that you can strip the apart bit by bit an rebuild it yourself..