3dsjs

OMDS 150-400 Pro镜头罩

Lens Hoods for OMDS 150-400 Pro

2024-03-26 20:22:35

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

These are a collection of lens hoods for the Olympus/OMDS 150-400 Pro Lens.
There are two styles available..
One is a Fixed hood alternative to the rather expensive OEM version in half and third lengths with ribbed and smooth versions.
Requires a single 20mm M4 threaded machine screw.

Second is a reversible design that is two parts, Part a is an adapter ring that mounts to the lens, this part requires two M3 grub screws preferable 10mm long but 8mm works as well.
The other parts are hoods both ribbed and smooth in 40/60/120mm lengths.

The smooth walled versions are ideal to line with self adhesive black felt.

It is recommended to print these in Black (matt) PETG or ABS, the matt look can be achieved by using Carbon Fibre versions of the filaments.

In both fixed and reversible designs there are trim rings to bling the hood out and custom Caps.
Both should be printed in TPU-95A in any colour you like.

Note these are a very tight accurate fit by design and will require an accurate and dimensional accurate printer for good results.

Adapters and reversible hoods require supports to the used.
Fixed hoods can be printed wihout support.

Tags

License

CC BY-NC-ND

Lens Hoods for OMDS 150-400 Pro
by aussiephil is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.

OMDS 150-400 Pro镜头罩
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢