游戏片段基础

Game Piece Base

2024-03-26 21:50:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a base for a piece for a board game, or perhaps a miniature. At the default size, it has a small void on the bottom of to allow for a US Penny to be friction fit (or hot glued for more security). There are four channels leading from this void to allow for the weight to be removed or to help you pry it up off the print bed.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
No
Resolution:
0.2mm
Filament brand:
Inland
Filament material:
PLA+
Notes:
I printed this several times with the void side facing down and didn't have any trouble with the overhang from the void where the penny goes. I did experiment with printing speed and when using the fastest preset in Cura there was a bit of variation with prints and sometimes this would affect the void area, making it necessary to process the area a bit in order to fit a penny inside. However, with the slightly slower, Standard preset I didn't run into this problem. I did not try printing it with the void side facing up, but I imagine that would also allievate this issue.

How I Designed This

I grabbed a personal license for Autodesk Fusion 360 and gave myself the goal of making some board game pieces to learn the software. This base fell out of me working towards that goal. I'm pretty pleased with how this turned out and could see it being useful in a few different applications. I hope someone finds this useful.