Mirka Systainer可堆叠砂纸盘（150mm）+ 底板

Mirka Systainer Organizer - Stackable sanding disk (150mm) + base plate

2024-03-27 00:02:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A set of elements to organize your Mirka Deros Systainer :

1) The "Mirka offset plate" file is created to offset the sander. It allows to keep the power cord and the dust hose adaptor on while in the systainer. It also keep the little wrench from moving around !

2) The "Mirka Sanding organizer" has to be printed like this :

1 x Plate
3 x knob (to glue on the plate)
4 x Sandpaper trays of your choosing (you can also modify the grit number in the f3d file in the sketch named "Grit number")

All models can be modified with the Fusion 360 files.

If you don't have fusion 360 or have a suggestion, don't hesitate to ask.