华硕PA-1650-48电源适配器台面侧边持有架
Asus PA-1650-48 AC Adapter Holder for desk side
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
As we keep catching the cord with our feet or kicking the ac adapter (that was almost always on the floor) I modeled this little holder for my wife´s notebook adapter as a solution.
I made it intentionally "roomier" so it is better ventilated and is easier to place and extract the adapter.
It has 3 holes so it can be attached via screws to the side or behind a desk.
The infill inside the hexagons was a little difficult to remove , it is probably not needed there but I didn´t wanted to take risks.
If you need to have the output cable on the other side you can probably flip the model in the slicer you are using
Hope someone find it usefull.
Cheers!
Print Settings
- Printer brand:
Hellbot
- Printer:
Hellbot Magna 1
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:10
- Filament brand:
Printalot
- Filament color:
White
- Filament material:
PLA
Tags
License
Asus PA-1650-48 AC Adapter Holder for desk side
by TheForso is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
MBX5 电池与 ESC 组合托盘2024-05-08 -
JK剧集BMS屏幕支架设计2024-05-08 -
树莓派相机外壳模型2024-05-08 -
Shift Collar Boot Support - 可调节领口靴子支撑2024-05-06 -
汤马霍克 ASG32 4.44米 42毫米鼻部切割模板2024-05-06
最热下载
-
3D打印斯特林发动机型号Alpha2023-03-26 -
Makergear M3 M2喷嘴标签2024-03-27 -
罗宾：不公正22024-04-07
-
中指2025-05-17
