纸夹关节
Paper Clip Hinge
2024-03-27 03:39:46
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Small hinges for your various projects, my use happens to be attaching an elevator to my RC plane. They will need some filing with an emory board to make them pivot freely cuz I was lazy and did't make extra clearance, but it only takes a few seconds. Then just stick a paperclip in there and bend the ends to keep it in place. Parts A and B are different heights for slightly different thicknesses I had to work with, part C is the opposing side.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 SE
- Rafts:No
- Supports:No
- Resolution:.10-.16
- Infill:100%
- Filament brand:
Creality
- Filament material:
PLA
- Notes:
Use a short layer height for high detail as these have small holes, and no need to crank up the speeds they will print great in like 20 min.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Food waste bin2023-04-29 -
GARMIN MONTANA 700 填充功能2024-01-04 -
Fortnite重启卡片2024-03-15 -
铁砧模型2024-04-18
-
blink门铃钥匙2024-05-08
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
Voith Schneider 螺旋桨 VSP2023-04-11 -
Delta设置校准为Klipper2023-04-23 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
罗技K400键盘壁挂式支架2025-07-27 -
巴黎卢浮宫的三圣母像2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24