创实 CR6-SE 主板散热盖 / 92mm 风扇适配器

Creality CR6-SE Motherboard Cover / 92mm Fan Adapter

2024-03-27 03:54:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This motherboard cover is designed around fitting a Noctua NF-A9x14 in to my CR6 without raisers or changing the outer shape. This should accomodate any 92mm fan 14mm thick, and presumably also fans 15mm thick (untested) - if it doesn't conflict with the mount for the buck converter.

There are 4 variations, countersunk or flat, and self tapping or inserts. The flat variations still have countersinking for the 4 fan screw holes. The pictures I've added are for the countersunk with inserts variation,

To install a 12V fan in the CR6 you will need to use a DC-DC step down/buck converter, as the CR6 fan headers provide 24V. This cover includes a bracket to mount the commonly found converters with M2.5 screws, using the insert or self tapping variations.
I found it easiest to cut up the spare adapter that came with the fan, and solder (& glue) this to the converter to make un/install easier.

Recommended parts

2x Countersunk M3*6 screws
1x Countersunk M3*12 screws
2x M2.543.5 brass inserts
2x M2.5*6 screws

I found this printed fine without supports using layer height of 0.2mm or less. Wall count can be important to set appropriately. Good dimensional accuracy settings are likely important.

I would suggest a variation of PLA over PETG, as I found my PETG prints to be too flexible.

Original design, but insprired by https://www.thingiverse.com/thing:4716529