Δ形种植器具

Delta 3D "Planter"

2024-03-27 12:02:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Enjoy getting your plants 'printed'!

When water is poured into the upper tray, water is fed through a Teflon tube into the extruder (pot). The water is further fed through nozzles to the build plate (lower tray). By passing the yarn through the nozzle, capillary action causes the water to rise, keeping the soil inside the extruder moist.

Please refer to the three-page instructions for assembly.
Almost all components are 3D data, but you will need to provide a Teflon tube with an outer diameter of 4 mm and wool yarn.

*Upper tray is recommended to be printed upside down with support.