RONIN-S 轴向锁具

RONIN-S axis locks

2024-03-27 17:13:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Axis locks for RONIN-S.

https://youtube.com/shorts/6XdkOBWnCwM

Since the Ronin S doesn't have axis locks, I decided to make my own so that they could be permanently on the gimbal and the axes could be locked and unlocked with the click of a button (just like other, newer Ronin models).

After printing (I recommend printing from ABS) slide the LOCK part into place in the appropriate btm part and then snap both btm parts and both top parts of each axis together directly on the gimbal (use reasonable force). To keep the parts in place afterwards, use a few drops of acetone or instant glue on the snap joints and the contact surface of the rings and gimbal, or use thin double-sided adhesive tape on the contact surface. Especially on the PAN axis, this is necessary so that the btm parts do not rotate.
When gluing in place, make sure that there is about 0.5 - 1 mm of space between the two rings and that the axes can rotate freely when the lock is unlocked. Try it dry first, then glue! Be aware that using acetone or glue can leave marks on the gimbal itself and too much can damage the gimbal! Use only at your own risk.