充电线路释放按钮（适用于杜奥西达类型2充电插头，特斯拉版）

Charge cable relase button for DUOSIDA Type 2 charge plug (Tesla release)

2024-03-28 02:14:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a holder for a Panasonic ASQM17420 push button switch (NC).
This insert fits into a standard Type 2 charge plug for electric vehicles made by Duosida.
The pin inserts fits into the existing hole on the bottom of the plug.

The purpose of this is to add a push button that can signal the car to stop charging and to release the cable.
See this thread https://tff-forum.de/t/charging-cable-release-tesla-taste/33270 for more details (german).

Some filing / manual rework on the print might be required. This is a close fit. You will also have to remove a tiny amount of material on the plug (see duosida_cut.jpg).
This is just a proof of concept, use at your own risk.