USB数据线模块化接口卡

USB Shifter Sequential Mod Clip

2024-03-28 03:24:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a clip or replacement clip for the USB H-Shifter that enables the shifter to operate as a sequential shifter. The unit I bought off Amazon is the Aikeec USB Shifter 7 + R which came with the sequential shifter clip but this should even work for the 6 gear version (I think). The problem I have with the original clip that came with the unit is that it requires a tiny nut and bolt to be used to secure it in place and that it slowly works itself up the shifter shaft. I designed a replacement clip that doesn't require anything to secure it in place and won't ride up the shifter shaft. To install the replacement clip, pull the magnets out of the stock clip, insert them into the redesigned clip, and then install the clip onto the shifter in the sequence pictured from 1 to 3. Removal is the reverse of the installation. I printed it on it's side with the open side up without supports like how pictured in Cura but you can use supports if you want. If you don't have the original clip and need magnets, the magnet that came with the clip I modeled the design around measures 3.9mm x 7.5mm.