浴室暖气架子上的毛巾挂钩

Towel holder for bathroom radiator

2024-03-28 03:52:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

What it is

These are brackets for hanging a towel on a bathroom radiator. A 30mm diameter wooden rod is screwed in between the brackets. I used beech wood for my holder and fixed it to the side with VA Torx screws.

Limitation

These brackets are only suitable for radiators whose pipes have a diameter of approx. 21mm and an average spacing of 40mm (center to center).

Mounting

Measure the inner distance between the left and right vertical tubes of your radiator and subtract approx. 8-10 mm from this. This then corresponds to the length of the wood.
The wooden rod must be fastened with 4 mm countersunk screws. I used stainless steel screws measuring 25x4 mm.