顶壳设计适用于AooStar GODxx、Tian Bei MN5X、MN18A及克隆迷你PC

Top shell for AooStar GODxx, Tian Bei MN5X, MN18A and clone mini PCs

2024-03-28 14:13:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

顶壳设计适用于AooStar GODxx、Tian Bei MN5X、MN18A及克隆迷你PC

Summary

This is custom top shell for Aoostar GOD and Tianbei MN5X mini PCs. And probably other brands that use the same supplier.

Mine is Aoostar GOD78 with Ryzen 7 7840H. While it works OK as is, when you push CPU a bit it heats up to 86+ °C, starts to thermal throttle and, what's worse, fan ramps up to 2500 rpm and is quite audible.

When I took the top off it didn't thermal throttle and fan didn't go above 1250 rpm.

So I designed custom top shell that has a bit more ventilation.

There are three versions, first one is original size, second is 2mm higher and last one is 5mm higher.
Reason is that with original sized one it still occasionally ramped the fan up to 2500 rpm for few seconds under heavy load.

In the end I went with 5mm higher and now it doesn't exceed 1250 rpm.

But depending on CPU in your mini PC original or 2mm version might be enough.

I also made three versions of each, one is with hex cutout mesh, second one is without so if someone wants to remix it with some other pattern feel free.
Last one is without side cuts so you can customize everything.

I made this with FreeCAD so I also included files with FreeCAD parts.