传说中的隐藏宝藏团队金币

Legends of the Hidden Temple Team Coins

2024-03-28 19:24:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Team Coins

I have only printed these in resin, although they would probably print in FDM just fine with either a small enough nozzle or if scaled up a little bit.

For resin printing, I just print them standing straight up with some supports going about halfway up the outer rim of the coin. If you’re printing all 6 at once, it may be a good idea to space them out a little bit so you get good weight distribution.

If you want to print them with FDM, a good option might be to split the coin in half and print both halves with the flat side down. If you are interested in variations of these coins please just let me know and I’ll make it happen!

*This design is uploaded with a non-commercial license. Downloading this file does not grant you the right to sell commercially.

If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D

Post-Printing

Post Processing

For these coins, I basically follow a 4 step process:

Clean Up - Light sanding over the support scars with 220 grit sandpaper then clean off well.
Paint - I use Rustoleum Bright Coat Metallic Gold Spray paint, 2-3 coats is more than enough for these.
Weather - Some watered-down acrylic black paint directly into the cracks and crevices, then wiped off with a paper towel until I like the level of weathering.
Clearcoat- I use Rustoleum 2X Matte Clear Coat to finish, although I’m currently looking for something that dries a little “harder.”