纳夫弹匣到速度加载器适配器

Nerf stock clip to speed loader adapter

2024-03-28 19:38:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My first attempt at CAD 3-d design. This is made to go into the nerf regulator stock and is made to hold this https://www.thingiverse.com/thing:2826909 speed loader. original design for the clip body here https://www.printables.com/model/652657-nerf-elite-dart-magazine/files . I would love to see your makes and get feedback. if i get enough downloads i might update it with a version to hold standard rival clips just for fun. Also model may require resizing let me know in the comments what size works. I will try to update with photos later on.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Max
Rafts:
No
Supports:
Yes
Resolution:
.2 mm
Infill:
20% should do
Filament brand:
Elegoo
Filament color:
black
Filament material:
PLA

Post-Printing

tolerances may be a little tight or loose i recommend putting a piece of tape onto the speed loader if it is to small but if it is too big try sanding the inside of the holder. Two small dents might need to be drilled in the top lips of the clip so that it can snap into the stock but your milage may vary