Fridge display cover

2024-03-29 03:13:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I often accidentally change the temperature settings of the fridge while leaning over it in the car so I decided to do something about it !

The fridge I designed this for is the BougeRv 35L car fridge, I suspect it will fit other models that use the same body design as well. It was scanned with my revopoint Miraco 3d scanner and then modeled around that so the fit should be pretty spot on.

I only ever change the settings of this fridge via bluetooth so the buttons arent needed for me. I did however include a version that has button cutouts, you should be able to fit a small finger in to activate the buttons if needed.

The cover has two sections that are slightly recesed to fit some double sided tape. The recess should just be enough for the tape to still grip while keeping the profile as flat as possible. You may need to adjust this recess depending on the tape you use. I used some gorrilla outdoor tape.

If you test this on another fridge please leave a make and comment to let me know if it fits that model!