Seltzer Koozie / Coozy with air gap（适用于Truly、White Claw等品牌）

Seltzer Koozie / Coozy with air gap (for Truly, White Claw, etc)

2024-03-29 06:17:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Seltzer Koozie / Coozy with air gap（适用于Truly、White Claw等品牌）

Summary

This is a coozy designed for the tall, skinny cans that are most commonly found in seltzers like White Claw and Truly (both have been used for testing).

The base part has two walls and an air gap in between, inspired by the vacuum insulated metal coozys that are available for standard beer cans. Obviously we can't draw a vacuum in the 3d printed part, but based on my testing this still provides acceptable insulation.

The lid should be printed with the lip facing down to avoid the overhangs at the transition where the threads end. It can be screwed on and off the base in order to insert and remove the can.