创意LED灯条支架设计方案
LED light bar mount for modular mounting system
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a shade for an LED lightbar, for use within the modular mounting system. It uses my favourite ball mount for the MMS:
https://www.thingiverse.com/thing:3976976
The LED is a 12V COB strip. I was using these:
https://www.aliexpress.com/item/32911286411.html
These run HOT. To get around this, and to avoid issues with PLA melting, I did 2 things:
- the strip is isolated from the body of the shade by m2 bolts, with nuts and washers behind each end, and a nut in front so that the bar does not contact the print.
- the LED strip has aluminium heatsinks on the back, to dissipate heat (I used these, cut to width: https://www.aliexpress.com/item/1005001771510487.html )
The design has the potential to be remixed for other sized LEDs.
Best printed with the ball mount upmost, requires support, but gives the cleanest result
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Supports:Yes
- Resolution:0.4mm
- Infill:100%
- Filament brand:
generic
- Filament material:
PLA
License
LED light bar mount for modular mounting system
by htcam is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
野马Mach 1雾灯支架模型2024-05-08 -
Pokemon Go 社区日第86次 # Bounsweet 鸣泉2024-05-08 -
1/56 比例（约28毫米）戈瑞什小人2024-05-08 -
sourceone v5 HGLRC M100 5883 支架2024-05-06 -
科拉多·莫兰娜 3D 模型2024-05-06
最热下载
-
伊瑟宁加德骰子塔（奥斯坦克）2024-01-17 -
Makergear M3 M2喷嘴标签2024-03-27 -
Articulated Snake2024-03-30 -
超越IPD板2024-05-03 -
Enders 3版控制面板2024-05-08