火炮侧风者/创意大师激光模块安装架

Artillery Sidewinder/Genius Creality Laser Module Mount

2024-04-15 06:35:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Bracket to mount a Creality Laser Module to an Artillery Sidewinder/Genius 3D Printer.
(Tested only with 5W Creality Laser Module, should compatible with 10W module, for the 1.6W you would have to adjust the Side Screw panel)

Print Settings

Printer brand:
Artillery
Printer:
Artillery Genius
Rafts:
No
Supports:
Yes
Resolution:
0.3mm
Infill:
50%

Post-Printing

Mounting

Remove the part cooling FAN (Screws + Plug).

On the blue plate screw in the top part.
Slide on the back side of the Laser, align the holes on the sides and use the hand-screws included with the Laser Module to fasten it
You can screw in an additional M2 screw on the back side of the mount into the Laser module.