飞行模拟器中的高度测量仪
Altimeter for flight simulator
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a replica of an altimeter. It is inspired by the airspeed indicator you can find in fighter jets but is not an exact replica. It is designed to be used with :
- a NEMA 17 stepper motor (like this one : https://amzn.eu/d/48ZMKHg)
- a digital sensor (like these : https://amzn.eu/d/fukfElb)
- a digital screen (like this one : https://wiki.seeedstudio.com/Grove-OLED_Display_0.96inch/)
The PDF is the background to be printed and glued to the front plane.
I will use it connected to a stepper driver shield for an Arduino Uno. I plan on using it for DCS World through the use of DCS Bios.
To assemble the different parts you will need 5 M3 screws for the stepper motor (M3x5mm) and the digital sensor, 4 M3 screws (M3x20 mm) and four nuts (M3) to attach the front plane to the motor support and 2 M2 screws for the display.
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK2S
- Rafts:No
- Supports:Yes
- Resolution:0.15
- Infill:15%
- Filament brand:
colorFabb
- Filament color:
Silver
- Filament material:
PLA
Tags
License
Altimeter for flight simulator
by Bacab is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
最新模型
-
西斯热力炸弹墙挂架2024-05-08 -
RAM 垂直式笔记本支架2024-05-08 -
金格龙kp3s风道适用于红蜥蜴2024-05-08 -
Clatronic吸尘器管子夹锁2024-05-08 -
Taco Bell国际象棋套装：车子棋子2024-05-08
最热下载
-
精灵族森林守护者A2023-03-26 -
FPV 模型：原型坦克配备炮塔2023-03-26 -
Articulated Snake2024-03-30 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21