Detachable Screw on Cat Ears

2024-03-29 20:31:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are some cat ears that can be screwed onto any material with a hole in it that is sufficiently big enough to fit the screw through. They can be inserted and removed without damaging the fabric (unless you had to make a hole in the fabric to put it in).

In the photo, the ears have been screwed onto a crochet headband. It would also fit nicley through the spaces on chunky double crochet fabric.

Since the base of the ears extend over the support that the base offers, you may see the edges of the ears come away from the fabric, depending on how thick your fabric is and how tightly you screw it on, so, I have included a support which you place onto the threaded base that gives a neater look after you screw on the ear.

The base also has holes around the edge. This is to prevent the ears from rotating, if that is something you are worried about. I have not had a problem with the ears rotating, but if it is, sewing the ears in place using the holes should help. You do not need to sew through all the holes to prevent rotation, one or two should be enough.

The threaded base is the sme one used for the unicorn horn (https://www.thingiverse.com/thing:6514072), so if you have printed out one from before, it will work with these cat ears as well.

I hope you like them!