快速打印的双层兼容火车轨道30度曲线3D模型

Fast-printing Duplo-compatible train track 30 degree curve

2024-03-29 21:13:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This track prints >2x faster than other Duplo-compatible track designs on Thingiverse, which matters if you want a lot of track.

Compatible with Duplo and 3rd party products dating back to the 1990s:

One reason it prints faster is that the track is lower to the ground, however it has a neat feature that ensures compatibility with standard track designs. This involves two lips designed to grip the top of any conventional track pieces it is connected to, that keeps itself raised up at that end, so that it naturally offers a suitable ramp. There is no need for a spacer unless you are using it with vintage Duplo track (the old black-coloured track from the 1990s).

This design does not attache onto Duplo blocks/sheet, but you probably won't care if you are using it on the carpet/floor. If you want a viaduct train track raised up on stilts this can be done using the viaduct pillars.

Disclaimers:

This design is not associated with Duplo or the company Lego. Duplo and Lego are registered trade marks.

As you will be the manufacturer, please make your own assessment on suitability for children under 3, but I would suggest removing any parts if your child breaks them.

Print settings:

Quality - low (e.g. Resolution 0.28)

Infill: 15%-20%

Support - none

Raft - none

Material - PLA