KBO-5000 五千零零盒篷顶箱手臂休息架

KBO-5000 tented case with wrist rest

2024-03-30 00:06:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

KBO-5000 五千零零盒篷顶箱手臂休息架

KBO-5000 五千零零盒篷顶箱手臂休息架

Summary

Added simple fixed wrist rests.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Max
Rafts:
No
Supports:
No
Resolution:
0.32mm
Infill:
15% gyroid
Filament brand:
Overture
Filament color:
White
Filament material:
PLA+

Post-Printing

This time the bottom plates will not work anymore, so you will have to remove them. To keep the keyboard from moving around, you can use some bluetack underneath the case.
The wrist rest itself can be made from packing foam, you would need two pieces of 124mm by 61mm (I was too lazy and used whatever pieces I had laying around) to fit into the wrist rest slots.

How I Designed This

I made some simple wrist rests (holders) in Tinkercad and imported the STLs into Blender. There it's a matter of aligning the rest holders with the keyboard case and joining them together.

Tags

ergonomic kbo-5000 keebio

License

CC BY-NC-SA

KBO-5000 tented case with wrist rest
by TomUrlings is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

KBO-5000 五千零零盒篷顶箱手臂休息架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

EMF100 基础型号
2023-08-23
乌克里乐五声音阶结构模型
2024-03-19
雪峰Artemis PP750缓冲折叠枪架（Mussy Remix特别版）
2024-04-03
3D模型: Lula
2024-04-07
多板结构胶带夹持器
2024-04-30

最热下载

最新模型