天文望远镜四分镜支撑架洗垫/补偿器（Sky-watcher Quattro 250P）

Sky-watcher Quattro 250P secondary mirror holder washer/shim

2024-03-30 00:20:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

天文望远镜四分镜支撑架洗垫/补偿器（Sky-watcher Quattro 250P）

Summary

This is a washer/shim to go between the back of the secondary mirror holder and the mirror adjustment screws/knobs to avoid the screws binding on the back of the holder while trying to adjust the secondary mirror.

I was having significant trouble trying to accurately adjust the secondary mirror placement on my Quattro 250P as the screws were digging into the soft aluminium on the back of the mirror holder causing the secondary mirror to jump around when turning the screws instead of smoothly adjusting. This was especially painful when trying to make very fine adjustments towards the end of the collimation process when the mirror would suddenly jump past the place I needed throwing the whole adjustment out.

This washer/shim creates an interface between the back of the mirror holder and the screw heads to stop them binding and jumping out of position.

Will possibly work for other Sky-Watcher Newtonians/Dobs with a 42mm diameter secondary mirror holder and works great with Bob's Knobs installed in the holder - so much easier to get fine tuned adjustments on the secondary mirror.

I printed mine at 3mm however it would probably work fine at 1-2mm too if your secondary mirror doesn't need much travel down the tube. Stencil should rescale in the Z axis if you want to play with the thickness.

Stencil Dimensions should be 42mm x 42mm x 3mm.

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Filament brand:
eSun
Filament color:
Black
Filament material:
PETG
Notes:
Print in black filament ideally with a matte finish if possible to avoid any chances of the washer causing light reflections (unlikely but Telescopes are finicky some times).