Ikea缺口式包装盒 [高稳定性原创设计]
Ikea Lack Enclosure [High Stability from Scratch]
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan![Ikea缺口式包装盒 [高稳定性原创设计]](https://cdn.thingiverse.com/assets/00/a1/5a/0f/49/large_display_b337a3dd-f8f5-417c-832c-74e8f984e909.jpg)
![Ikea缺口式包装盒 [高稳定性原创设计]](https://cdn.thingiverse.com/assets/fe/9e/78/5b/4d/large_display_d00466b1-634a-4277-9c01-453b3ab4877d.jpg)
Summary
After trying two different and very popular Ikea Lack Enclosures i still wasnt satisfied with the result. Mainly because of the overall stability and inaccuracies during assembly due to the design.
Although i really would have liked to use one of the existing ones, i decided to try my “own” version of this great idea.
I started from scratch and tried to included and exclude all possible pros and cons of other designs.
Main goal was to make this as stable as possible while not using too much filament.
Assembly instructions in the picture section.
Technical Data and advantages:
very stable but still does not use too much filament
all screw points are optimized due to material thickness of the ikea lack table.
uses existing mounting holes of the ikea lack table and makes this a easy to mount project
easy to achieve perpendicularity
magnets included in the handles and no glue required
more accurate positioning of one table onto the other
inner height: 450mmPurchase Parts:
Acryl or plexiglass panels
220x440x3 (2x)
440x440x3 (3x)
dowels D=6mm (x8)
wood screw countersunk head
D=4,5 - 5 x at least 30mm i've used 50mm
D=4,5 - 5 x about 15-20mm
neodym magnets 20x6x1,5mmPrint Settings i've used:
all parts printed with normal PLA
0,2mm layer heigt
15% of infill
non of the parts require supports
see slicer picture for print orientationsFor the Filament Passthrough i've used:
https://www.printables.com/de/model/34334-ikea-lack-enclosure-filament-slot
Tags
License
Ikea Lack Enclosure [High Stability from Scratch]
by DsK_Printing is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
大猫雕像2023-05-14 -
eesy打印枪3D模型设计2023-05-17 -
支撑梯架兰迪2024-04-14 -
Pico Neo 3 链接控制器2024-04-15
最热下载
-
可定制像素珠子照片面板2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
欧宝Zafira B倒挡锁止机构（倒挡防误入装置）2024-04-02 -
18650电池存储盒2024-04-18
最新模型
-
模块化笔筒链2025-07-19 -
比基尼模型2025-07-16 -
丰满跪姿美熟女2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
