里卡多行李箱 77毫米×25毫米轮子

Ricardo suitcase 77x25mm wheel

2024-03-30 02:44:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After my sister's flight the oh so careful luggage handlers managed to mangle one of the casters on her beloved Ricardo suitcase. On the the internet I voyage to find... nothing that fit. That is not exactly the truth. I could return the case to Ricardo for repair for $$$.

Being the cheap bastard I am I went to Fusion 360 and in ten minutes had a new caster wheel ready to print.  The hardware on the case was easy to access the three screws and two "RIVETS" that held the wheel assembly to the case. Let us say they did an excellent job with the rivets. I don't think they want to fix this. Those two rivets took me longer to remove    then to the design and fix the assembly.

You will have to used the old ball bearings from your old wheel / caster. So, don't throw any of the hardware. I cleaned and re-lubed the old ones.
I have included a .Step file if you need to remix for new bearings or none.

Print Settings

Printer brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.6 nozzle, 5 walls, 8 top and bottom solid layers
Infill:
10% cubic
Filament brand:
Inland (Esun)
Filament color:
natural
Filament material:
ABS
Notes:
not suitable for bog standard PLA. This is a high wear part. PLA is too brittle.
Use ABS, PETG, ASA, if you must PLA+