45度直立式固定支撑架（1/8英寸或3.175毫米）用于激光床
45° & Straight Hold Down & Standoff for Laser Bed (1/8" or 3.175mm)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Standoff and hold down for Co2 laser metal honeycomb beds. This is for 1/8" or 3.175mm pieces. It has just enough of a lip area to hold the piece but also has a 45° integrated into the piece to allow you to use it on a corner.
Print Settings
- Printer:
Snapmaker A350
- Rafts:Yes
- Supports:Yes
- Infill:25%
- Filament brand:
Hatchbox
- Filament color:
Red
- Filament material:
ABS
- Notes:
Print Head Temp: 225°
Heated Bed Temp: 70°
Layer Height: 0.24 mm
Speed: 60 mm/s
Bed Adhesion: Brim
Post-Printing
Magnets & how to put together
Magnets: 60mm X 10mm X 3MM
https://www.amazon.com/gp/product/B07DFZH4WT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
After inserting the magnet (make sure it is the correct way), I used a Q-Tip and Acetone to "glue" the ABS pieces to one another.
Once the glue set, I used 150 grit sandpaper to rough sand the edges, then followed that with 220 grit to smooth it out.
A light coat of Acetone over the finished piece brought back the glossy vivid color look.
联系我们
热门推荐
-
Cyborg Beast2023-03-26 -
原子鱼导弹型号MG7-A2024-04-11 -
无图标 H1 - Heltec V3 外壳2024-04-15 -
刀之站立2024-04-16 -
巨魔头像 012024-04-21
最热下载
-
Valorant 杰特的姿态2023-03-26 -
Flex Dino钥匙链2023-03-26 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02 -
沙箱建筑模型2024-05-08 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
罗技K400键盘壁挂式支架2025-07-27 -
HGX lite v2支架2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
坏龙家的大宝贝女生别下2025-06-26