衣架钩子结构模型
Coat Hangar Klip
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is similar to the Ruby Triangles and other clothes hangar hooks, but can easily be 3D printed in place with no supports.
I do suggest using “Outer Brim Only” so that it does not knock the one edge over.
This allows you to hook multiple hangars in one spot or attach a light bag.
I used PLA+ on the Bambu X1C .20mm Strength setting.
I am sure this will print fine on the Ender and others as well, I just have not yet tried it on my Ender or Tenlog... I will soon though.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:.20
- Infill:35%
- Filament brand:
Esun
- Filament color:
Red
- Filament material:
PLA+
- Notes:
This is set up to print easily, please use an Outer Brim to keep the one piece from falling over.
Tags
License
Coat Hangar Klip
by propturbo is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
3D模型：玩具双翼飞机2023-04-06 -
Lego RC车遥控汽车支架2023-06-10 -
基斯·西蒙斯 Chibi KISS2023-07-25 -
3D模型：肩部按钮模块V0.1B2024-03-25 -
10cm 曲奇形状模具2024-04-20
最热下载
-
钥匙解码器（用于房门钥匙复制）2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
高尔夫球支架 / 展示架 / 陈列架 / 收纳架2024-03-29 -
Hein Gericke Hiprotec 快拍2024-04-03
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
高跟鞋鞋架2025-07-17