英特曼定时器触发销拔具

Intermatic Timer Tripper Pin Puller

2024-04-30 08:43:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Description

A puller to pull tripper pins (style 156T1950A) from intermatic timer wheels. Solves busting a nail trying to get a tripper out or having to run to the toolbox.

The tray I designed to hot-glue into place, but double sided tape should work for awhile. Printed plastic has that interesting attribute of dissolving the two sided tape bond with time.

Puller is stored in the tray and spare trippers snap gently over the front edge so they don't fly out all over the ground. There is lots of room to separate them to make grabbing one easier.

USAGE instructions

Note, the tripper pin heads are not symmetrical.
The tool handle is rounded on one side and that should be used with the rounded side towards the center of the dial.
Slip the larger portion of the tool over the tripper pin until the head of the pin is seated in the grove in the L portion of the tool head.
Close the smaller end of the tool on the outer part of the tripper pin with the overhang going on the opposite side of the pin as the first end of the tool
Pinch closed and pull (wiggle as needed for those stubborn ones)