创实 Nebula 摄像头支架（用于创实机箱）
Creality Nebula Camera Mount for Creality Enclosure
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I wanted to mount my Nebula camera up out fo the way but still have a good full-size view of my build plate. Since I have my Ender 3 V3 KE inside the Creality Enclosure I designed something to work. This clamps to the 8mm rod used in the enclosure using 2 #6 self-tapping woods crews. Fits great, gives a great view, and easily attaches to the current setup without having to disassemble the enclosure. Link to the enclosure below that I am referring to.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 KE
- Rafts:No
- Supports:Yes
- Resolution:.20
- Infill:25
- Filament brand:
Creality
- Filament color:
Yellow
- Filament material:
PLA
- Notes:
I used PLA but you can use what you prefer. I did go with 4 walls and 25% infill. The only support needed is under the Nebula mounting surface. If you set your support gap distance to .30, it removes easily and leaves a good surface finish.
Tags
License
Creality Nebula Camera Mount for Creality Enclosure
by ChopperOriginals is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
最新模型
-
微型伺服到标准伺服接口适配器2024-05-08 -
轻量级螺旋桨2024-05-08 -
腰带挂钩2024-05-08 -
熊王2024-05-08 -
HO缩小版葡萄架模型2024-05-08
最热下载
-
飞行三维 Fly-π 与 Fly TFT V1款外壳 V1.02023-03-26 -
桌子反面的抽屉2023-03-26 -
螺旋锥形手玩具（全新）2024-05-08
