皇家版钻具架
Imperial Drill Bit Organizer
2024-03-30 23:41:55
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a table top imperial drill bit organizer, based on the common 29 piece kit.
It includes:
- 4 slots for : 1/16", 5/64", 3/32". 7/64", and 1/8"
- 2 slots for 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"
- Little cubby on the 3rd tier
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:15
- Filament brand:
Hatchbox
- Filament color:
Red
- Filament material:
PLA
- Notes:
I used 4 walls and I also used 5 solid base layers.
How I Designed This
Fusion 360
I used fusion 360, originally had 6/3 of each bit but the print was too long on my ender 3 pro. So I shrunk it down. Tried to minimize filament while allowing room to actually grab the needed bits.
Tags
License
CC BY-NC-SA
Imperial Drill Bit Organizer
by schaferrism is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23 -
黑武士2游戏手柄改装及配件分离2023-08-23 -
3D打印 Hawkeye Thumb 2摄像头模型2024-03-21 -
尖峰装饰附件2024-04-04 -
TBS源一V5 Matek M10Q 5883 Vifly GPS伴侣SMA安装座2024-04-11
最热下载
-
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23
-
Dado - 立方体模型2024-03-24 -
沙箱建筑模型2024-05-08 -
厨房水槽滤网过滤器2025-06-05 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
HGX lite v2支架2025-07-18 -
裸女站立2025-07-16 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
关节活动人，假人13,Dummy 132025-07-02