Elegoo Neptune 3 系列火山型打印头 v2.5 5015
Elegoo Neptune 3 Series Volcano printhead v2.5 5015
2024-03-31 00:25:34
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Printhead for Elegoo Neptune 3 Pro/Plus/Max printers.
For E3D Volcano heatblock with 27.5 mm throat with ~35.15mm 2x4 PTFE tube.
Same as 2.4.2, but without decorative head volume.
Why is it better?
- Streamlined by design: minimized plastic, fewer screws, optimized functionality.
- Effortless installation: secures with just two screws and a self-tapping screw.
- Maintenance made easy: cooling fans that slide and disconnect in a snap.
- Enhanced cooling of the throat and radiator.
- Powerful heatblock: Volcano heatblock itself offers a higher limit of volumetric flow, and the cooling nozzles focus the air streams directly under the nozzle. (I've recommend to use 8500 RPM blowers)
WARNING!
- With Marlin (with original screen): reset your offset to 0mm before replacing the original head with this one and recalibrate the offset after changes.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
啤酒盛放器2024-05-08 -
摩纳拉小玩意儿（IDK）2024-05-08 -
福特OBS后部车厢地板插头2024-05-06 -
3D模型：环形桌子老鼠屏障2024-05-06 -
STIHL适配器2024-05-06
最热下载
-
钥匙扣2023-03-26 -
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
Quansheng UVK6 桌面支架2024-01-10 -
基础鸟饲料架2024-04-30
