便携版 EDC 多用途六角螺丝刀（配套存储盒）

PocketDriver - EDC Hex Bit Screwdriver w/ Storage

2024-03-31 04:43:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body.

It comes in 2 versions, a Large (can carry up to 4 bits) and a Medium (can carry up to 3 bits). Printing it is super easy, just make sure to print it standing up with a good brim and good bed adhesion so that the body doesn't fall mid-print.

At the base of the bit socket, there's room to affix a 6x2mm round magnet (a 5x1mm magnet also works). The model features 0.3mm tolerances for the bits, though depending on your printer and material, it may be slightly snug. If needed, using pliers to insert and remove bits a few times can help loosen the slot.

Happy printing!