Flacon 2激光版 - DoFiKi床角装饰支架

Flacon 2 LASER - DoFiKi Bed Corner Brackets

2024-03-31 07:20:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These things are a set of 4 Corner Brackets to firmly center and affix a 500 x 500mm Dofiki honeycomb burn plate to a Creality Flacon 2 22W Laser Engraver. The Corner Brackets are unique to each corner due to the relative sizes of the laser and the burn plate. Each corner is labeled; LT Front, RT Front, LT Rear, and RT Rear respectively. The Corner Brackets fit over the laser legs and are compatible with the standard leg extensions. The DoFiKi burn plate is securely fixed to the laser so problems with centering and locating parts are eliminated because both the Laser and burn plate are a single unit. The DoFiKi is made of steel and is magnet compatible. 30mm X 2mm magnets are perfect for securing templates and materials to the burn plate.

The corner brackets were printed using black PETG on a Creality E3S1P printer. The corners may just as well be printed in any material you desire. All 4 corners were printed at the same time. The images show the orientation on the E3S1P build plate. The other images show how the Corner Brackets affix to the laser. The laser legs must be positioned using the end holes on the laser.