3dsjs

Mandalorian 胸部装饰

Mandalorian Chest Pieces

2023-03-26 19:17:20

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

这是两块用于曼达洛rian盔甲的胸板。我已经将它们分割成适合Endecker 3床的尺寸。

::EDIT::

I've added in the Belly Plate in two pieces as well. Since it is a flatter piece, I've made the dowels a little larger. You'll still need to cut away some of the plastic but they will fit after a bit of tooling. The plate nestles in nicely under the chest pieces.
nAgain pieces should auto resize in Cura. I've been toying with the idea of pla welding some pieces, but I like the seam this gives.
n::
nThe Left chest has space for some extras (Not sure yet, but its there) and I've modelled in some dowels ( and their respective holes) to help in build process.

Basically to bind them use some hot glue along the edges and slot the dowels in; allow it to set, and the plaster over the join.

They should automatically scale in Cura or any other programs but the sizing you want is:

x: 34.9415 scale= 10000%
ny: 167.4311 scale = ""
nz: 152.2707 scale = ""

I used a tree support for this one as it does bind a loooot of support to the piece.

My first big design piece; if you have any questions holla

Mandalorian 胸部装饰
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15