壁挂钟架设计（适配宜家壁挂钟）

Clock Stand for Wall Clocks (Scaled to fit an Ikea wall clock)

2024-03-31 13:46:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I simply modified the Clock Stand for Wall Clocks by Nacksi by bringing it into TinkerCad and scaling the model to print the size correctly for my Ikea wall clock.
I just did scaling, other than that the design is identical to the great design that Nacksi provided. Thank you Nacksi!

Print Settings

Printer brand:
UltiMaker
Printer:
Ultimaker 2+
Rafts:
Yes
Supports:
Yes
Resolution:
Normal
Infill:
.2
Filament brand:
Generic
Filament color:
Green
Filament material:
PLA
Notes:
Original author said rafts are not needed, but I find with this printer model, Rafts are a good idea as the first layer sometimes has a print issue, and if the rafts get printed correctly I know pretty well that the print will succeed. Due to the rounded nature of the base, my raft came up slightly from the plate on one small part, but fortunately it didn't affect the print.