2盎司壁挂式纸杯容器/分发装置

2 oz. Dixie Cup Holder/Dispenser - Wall Mounted

2024-03-31 15:55:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Searched everywhere for a holder/dispenser for 2oz. Dixie (or generic) paper cups. Not finding any, I designed this. My significant other LOVES it and says it works perfectly for what she needed. There's even a lid that you can print to cover the top. Since the cups are dropped into the holder in an upright position, the lid will keep dust out keeping the top cup clean. Enjoy!
(Share to your heart's content but, do not sell for profit)

Print Settings

Printer brand:
Creality
Printer:
CR-10 Smart
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
40%
Filament brand:
Inland
Filament color:
Blue (holder) & Red (cap)
Filament material:
PLA+
Notes:
Just find the settings that work for you. I printed with 40% infill, which may have been excessive but, I wanted to make sure it stood up to having the cups yanked out of it daily. Print it upright with the holes at the bottom and no supports will be needed. The large holes are to fit a screwdriver through so that screws can be screwed through the smaller holes in the bracket and into the wall or wherever you want to mount it. I printed the holder in metallic blue and the lid in metallic red as those were the two colors I had on hand. I'll be reprinting in white for both as, even though she loves the function, she's not too keen on the color. lol
FYI: It took my Creality CR-10 Smart printer 16 hours and 13 minutes to print the holder and 1 hour and 44 minutes to print the cap. Depending on your printer and settings it may take longer or less time than it did me. Also, it's 20cm (200mm) high so it should fit in most printers and, it appears to be able to hold one full stack of cups as they are packaged in the box they come in.