理想标准 - 混匀器钥匙 - 扭矩扳手
Ideal standard - chiave miscelatore - tap wrench
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
-------------------------------------------------EN-----------------------------------------------------
Hello everyone.
This is a tool to uscrew the ring that lock the mixer of your ideal standard tap.
I made this because the ring is made of plastic and is better to unscrew with a proper tool.
Is possible to use an 1/2" ratchet wrench.
I used it for a 40 mm diameter mixer.
---------------------------------------------------IT-----------------------------------------------------
Ciao a tutti.
Ho creato questo utensile per svitare la ghiera di plastica che blocca la cartuccia del miscelatore ideal standard. Nel mio caso la cartuccia aveva un diametro di 40 mm.
La ghiera era bloccata e con la chiave a pappagallo avevo paura di rovinarla.
Inserendo questa bussola su una chiave a cricchetto da 1/2" sono riuscito a svitare il tutto molto facilmente e a sostituire la cartuccia guasta.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Supports:No
- Resolution:0.28
- Infill:100
- Notes:
I printed this item with 100% infill but i think that 50% could be fine.
相关内容
猜你喜欢
联系我们
热门推荐
-
星球大战:生存者十字光剑卡尔·凯斯特斯2023-08-04
-
斯坦利杯2024-01-11
-
FPV监视器支架 Radiomaster TX16S2024-04-16
-
可定制的钥匙扣2024-04-29
-
MBX5 电池与 ESC 组合托盘2024-05-08
最热下载
-
3D打印斯特林发动机型号Alpha2023-03-26
-
ZTE MU5001 上位电容器2024-01-10
-
3D模型:Easier Print LTT螺丝刀拉拔器2024-01-14
-
替换式膨胀喷嘴,适用于FLEXTAILGEAR小型泵。2024-03-18
最新模型
-
里奥兰德350瓦特6-60V PWM DC 无刷电机速度控制器安装基座2024-05-08
-
啤酒盛放器2024-05-08
-
HO缩小版葡萄架模型2024-05-08
-
垃圾桶与购物袋挂钩 v42024-05-08
-
宝马E34布罗塞座椅齿轮3D模型2024-05-06