Hoppin' Blossom (Easter basket)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Welcome the cutest Easter tradition in town with the Hoppin' Blossom Easter basket!
This design invites you to indulge your inner child by weaving together familiar Easter themes in an irresistibly endearing container for your treats or decorative elements. It comes in two versions - classic and ornamental - to match your mood and decor.
Print instructions:
Prints at 0.2 mm layer height - you can use a 0.6 mm nozzle.
It is 15 cm high, so you can comfortably print it on smaller print beds, but you can scale it up if you wish. The white marble model shown is printed at 130% scale.
The bottom part of the handle ends in a ~ 13 mm bridge, so you can print it entirely without supports depending on your printer's bridging capabilities.
For the best surface finish, make sure that none of the handle seams ends up in the overhang area.
Tags
License
Hoppin' Blossom (Easter basket)
by voidbubble is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
猜你喜欢
联系我们
热门推荐
-
基于ESP32摄像头的智能控制系统：用于罗佛操作和环境监测2023-06-24 -
Hikvision DS-KV6113 45度角支架2024-01-01 -
Ender-3电源下部支架2024-04-22 -
卫生间门传感器2024-05-02 -
丰田22RE发动机Starer电机2025-08-08
最热下载
-
Quansheng UVK6 桌面支架2024-01-10 -
BF1 单枪手机 08/18型号 Lego2024-03-23 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Prime Line C1254 阳台门钥匙锁稳定器2024-05-08 -
小型注脂枪补充装置2024-05-08 -
CQC 6XX耳机改装模型2024-05-08 -
FCX18 1/18比例 RC爬行器 & 无线电站2024-05-08 -
可重复使用的1kg线轴2024-05-06