拇指握式下降车把支架

Thumb Grip for Drop Bar Racing/Gravel Bike

2024-03-31 23:20:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

General

Designed for an elliptical drop bar crossshape with two 5mm cables running below it (brake and shifter) (see onshape screenshot). It can be installed over bar tape. I've not tried wrapping it with bar tape.

It works for me and I'm not the lightest rider out there. That said, stability of this depends A LOT on printing direction, material and settings, so if you decide to use them, THE RISK IS ENTIRELY YOUR OWN.

If you like the design and find it useful, please post a make, it is always nice to see your own designs in the wild! Also share with friends who might want it too.

Printing

Sometimes my cura takes a while to load onshape files, maybe due to the large amount of chamfers. If it doesn't display anything, give it a minute.

There is a flat side and a side with a groove in the grip.
Lay it on the flat side and you can print it without any supports.

Do not forget to mirror it for the other side.

I would suggest 3 walls and >20% infill for stability.

Bill of Materials

BOM for installation:

M5x25 Bolt
M5 Nut

(2x if you want this for both hands)

Sources

Link to OnShape if you want to play with it:
https://cad.onshape.com/documents/16e19466bedcdcd6738cf343/w/05ab22b483af2bbb9ed82d36/e/104928a0559bedced833830b?renderMode=0&uiState=660977ec35bd9b645908cbc7

Print Settings

Printer brand:
VoronDesign
Printer:
Voron2 300
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
>20%
Filament brand:
Bambu Lab
Filament color:
Black Matte
Filament material:
PLA
Notes:
Print flat side down.
Don't forget to mirror for the other hand!

拇指握式下降车把支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

适用于Maverick Strada MT Evo和HSP 94111（Brontosaurus）的遥控赛车扰流板
2025-06-17
地牢方块积木，定制升降装置 1x1型定制立管(兼容地下城积木)
2025-07-16
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座
2024-04-29
花环戒指
2024-05-08
用于Raspberry Pi高质量摄像头的D型安装适配器
2024-05-08

最新模型