空气压枪（Koonie）触发器更换
Koonie Air duster replacement trigger
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I recently had my Koonie Air duster trigger brake on me and I had a 3D printer so I whipped open inventor Pro and made up a simple replacement trigger which is almost a one to one replica And fits nice and Snug It prints laying down on its bottom and requires just a tiny bit of support material at the bottom after you can use your filament cutters or some sandpaper to sand or remove the rest of the support material to make sure it slides in nicely
Print Settings
- Printer:
Ender 3 v3 SE
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:15 or more
- Filament brand:
3D printing canada
- Filament color:
Whatever you designer
- Filament material:
Whatever your Printer can handle
- Notes:
I find the best way to print it is to lay it down flat and a slight angle and then use a little bit of support material to support it
Tags
License
Koonie Air duster replacement trigger
by Alexander2008 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
压缩袋真空适配器2023-03-27 -
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
老板螃蟹 KGC-0102023-09-08 -
自行车钥匙扣2024-01-05 -
Arduino继电器模块外壳2024-01-14
最热下载
-
3D打印圣诞树模型2023-03-26 -
Extra 330LX型RC飞机翼固定架（Multiplex）2023-05-23 -
Ikea 米兹顿 插嵌2024-04-20 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25 -
用于加长杆的戴森配件支架2025-07-17 -
比基尼模型2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24