空气动力学储物盒（公路自行车）

Aero Storage Container (Road Bike)

2024-05-04 12:08:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

the lid clips on with an rc car style retaining clip.

designed to suit 74-75degree seat tube angle frames (28mm tyre or similar).

Warning, this storage container sits above the rear wheel, if for what ever reason, the storage container slips down into the wheel it will likely ruin your day, so make sure it is printed sturdy (high extruder temp helps) and is well secured.

fits a light weght TPU tupe, multitool, dyna plugs and CO2 container.

top portion has a tab, this tab can be heated and moulded to the seat post where it can be clamped (with cable ties) to help prevent the storage container sliding down.

cable ties secure the main body and double sided adhesive should be used as well to garantee the container does not slip down into the wheels. braided fishing line can be used to remove the storage container later without damaging the frame of the bike.