凯撒自行车遥控架

Remote holder for Kaiser Bike

2024-05-04 00:29:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here is an add on accessory to my Keiser Spin Bike Shelf.https://www.thingiverse.com/thing:4863302

This has 2 slots for different sized remotes. For me, I needed one for an Apple TV remote and another or the Sony TV remote. It works well, but getting it attached to the shelf was a bit tricky as there is not much room for the screws. I recommend using a screw with a hex head or something that you can easily grab with your fingers while you tighten it. It does use small screws so you may have to do some trial and error to find some that work. I just pulled some from my stash. Sorry I don't have any pictures of it setup as I have since sold the bike (upgraded to a higher end spin bike).

As for printing, I just printed on its side to provide the most strength. Nothing special in the settings. Can use 20% infill and supports as needed, but should be able to print in a direction that doesn't need it. I do recommend a brim to keep the corners on the bed.

Thanks for checking this out.

凯撒自行车遥控架

朋友，你觉得上面这个模型，属于下面的哪个分类？