三星Galaxy Watch 5系列充电架

Samsung Galaxy Watch 5, 5 Pro charging stand

2024-03-19 12:11:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

三星Galaxy Watch 5系列充电架

Summary

Samsung Galaxy Watch 5, 5 Pro charging stand3d printed to hold charging puck.

Just insert the puck into the location. Run the cable along the tracks. The puck will be a snug fit depending on your print settings. You may have to adjust the model or carry out post-adjustments to print. I am happy to amend if you contact me.

This model was printed with Creality Hyper Pla at 220 Nozzle temp, 60 bed temp and .2 layer height. The model was printed on the side with support. The Cable run was full of support and did take a bit of time to remove. Increase wall thickness until there is zero infill on the left thin section of the stand. This will give more strength there.

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
0%
Filament brand:
Overture
Filament material:
PLA, ASA, PET-G

Tags

apple charger design display Galaxy puck Samsung watch

License

CC0

Samsung Galaxy Watch 5, 5 Pro charging stand
by DT3D_PRINT is licensed under the Creative Commons - Public Domain Dedication license.

三星Galaxy Watch 5系列充电架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

复古风格手机支架
2023-06-11
Grohe 管道扳手 34毫米
2023-09-10
ESP8266与OLED 1306案例分析
2023-09-16
Lian Li O11 Vision LCD Holder Sensor Panel
2024-04-07
FFBeast仿真飞行器模拟轮部件
2024-04-19

最热下载

螺旋齿轮玩具3D模型
2023-03-26
Flex Dino钥匙链
2023-03-26
HexiBox 唐氏 W3-2141 书架式扬声器
2025-06-17
用于RRD通用型70182电机的mayrc maytech桅杆夹
2024-04-20
螺旋锥形手玩具（全新）
2024-05-08

最新模型