RPi 4 DigiAMP 案例

RPi 4 DigiAMP case

2024-04-01 06:47:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple case for a RPi4 with the DigiAmp hat.
The case has place for a 30mm fan, as you might want to keep it cool.
Screws are pocketed, not sticking out underneath the case.
2mm wall thickness. I broke the case with 1,5mm wall thickness when removing the hole supports.

Assembly order
1 - install the fan
2 - place the DS card in your RPi and place it in the base. Without hat!
3 - screw the RPi to the bottom with the spacers
4 - place the DigiAmp hat audio connectors through the holes, then pressing it on the RPi GIO header and screw it on the spacers
5 - click on the lid