盖物架/存储装置

Lid rack/storage

2024-04-01 10:27:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A rack for lid storage.

I was gettiing tired of the loose lids in the drawer so I made this rack that fits in the drawer. It also look nice on the countertop (but take much less space hidden in the drawer!)

The kit is modular, print as many body as you like. Use one drop of hot glue in the peg holes then slide in the peg to combine parts.

There are pretty close to each other, so if your lids have big handles, you might want to print some 10mm spacers. If you use the spacers, make sure to also print the extended pegs.

Finish your project with the faceplate. I've included a blank faceplate, juste in case you don't like turtles.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Notes:
I used Duramic marble PLA PLUS. This PLA contains black pigment that does not melt so I also used a 0.6 nozzle to avoid nozzle getting jammed. Did a very good job to my opinion. Take a look at the pictures.